Can't find what you're after? Live Chat or give our expert team a call on 1800 337 366
Search our range of quality products...
Can't find what you're after? Live Chat or give our expert team a call on 1800 337 366

True 4
2 Channel, 120W RMS per channel. Bridged mode 240W output for 70V or 100V (Direct Drive) 4/8Ω or 100V line output selectable Balanced or unbalanced line In Standby or 12V DC trigger power on
$549.00
OUT OF
STOCK!
Increase value Decrease value
True 3
Channels: 4 Channels, 2 Zones. Continuous Power: 40 Watts/Ch @ 8Ω Bridged Power Output: 80 Watts/Ch @ 4Ω Power Supply: 115V / 230V
$459.00
ETA
Soon
Increase value Decrease value
True 2
Perfect for in-wall/in-ceiling speakers, the AMP-D20 can be mounted on/in walls using the supplied mounting ears. Operates in Stereo or Bridged modes (stereo or mono) 3.5mm Stereo input Quick disconnect screw-terminating plugs for easy installation (power + speaker output) Provides 20W max. of audio power to 4Ω (stereo) speakers
$199.00
119 IN
MELBOURNE WAREHOUSE
Increase value Decrease value
True 3
Bluetooth receiver for wireless high fidelity audio from portable devices. Audio inputs: 2x RCA & 1x 3.5 Mini Jack Bluetooth connection Internal Microphone RS232 Controller
$249.00
13 IN
MELBOURNE WAREHOUSE
Increase value Decrease value
True 3
Input: 4x 1/4" unbalanced jacks for connection to line or instrument level devices Each channel has a volume control Power: No power required
$49.90
17 IN
MELBOURNE WAREHOUSE
Increase value Decrease value
True 2
CH1: 1/4" unbalanced jack for receiving line or instrument level signals CH2: Stereo RCA input for receiving line level signals CH1 max. gain: 32dB CH2 max. gain: 20dB
$59.90
21 IN
MELBOURNE WAREHOUSE
Increase value Decrease value
True 3
19?single rack mount microphone and line mixer. 8 channels total inputs 6 channels XLR & 1/4? TRS input & 2 channels RCA & 1/4? TRS input Single 1/4? TRS & XLR Balanced main out
$299.00
1 IN
MELBOURNE WAREHOUSE
Increase value Decrease value
True 1
Put simply, the MTR150 converts your amplifier's speaker output to a 100V line. Low impedance outputs Cabling is expensive for most mid-range jobs Output is in stereo Massive cable runs (100+ metres)
$149.00
17 IN
MELBOURNE WAREHOUSE
Increase value Decrease value
True 1
"Hum" noise is a common problem in sound systems, even with the volume control set at minimum level. The HEB-100 is a low-cost tool that you can use to prevent the "hum" caused by ground loop. This unit can also act as a converter of unbalanced signals.
$99.00
19 IN
MELBOURNE WAREHOUSE
Increase value Decrease value
True 1
The MQS75 converts consumer level stereo RCA signals to balanced XLR professional line level, and back. It is the ideal solution for connecting audio sources like CD players, camcorders etc to professional devices like mixing boards, signal processors and associated amplifiers. Acts as a balanced XLR line level control Individual volume level controls for line 1 and 2 RCA to XLR and XLR to RCA conversion
$109.00
23 IN
MELBOURNE WAREHOUSE
Increase value Decrease value
True 2
For running two mixers from the one microphone ? for example broadcast and PA. Input impedance: 600Ω Output impedance: 600Ω Dimension: 95x73x40mm Weight: 305.5g
$59.00
14 IN
MELBOURNE WAREHOUSE
Increase value Decrease value
True 2
For when you need to connect a low-impedance or condenser microphone to a high-impedance mixer input, a PC sound card, a powered speaker or possibly an instrument amp. Input Impedance: 10kΩ THD: <0.01% IMD: <0.01% Output gain: 50dB (XLR), 44dB (6.3mm)
$99.00
19 IN
MELBOURNE WAREHOUSE
Increase value Decrease value
True 2
The MQS52 features a full selection of standard pro audio connectors for testing the five basic types of cables used widely in pro audio. Jacks: XLR, Phone Jack, Stereo RCA, DIN Dimension: 113x73x40mm Weight: 367.5g
$39.00
37 IN
MELBOURNE WAREHOUSE
Increase value Decrease value
True 3
Stereo Line RCA input and output Easy operation for Audio players, powered speakers or amplifiers Infrared remote control in tiny size Adjust Volume level and mute on/off
$79.00
38 IN
MELBOURNE WAREHOUSE
Increase value Decrease value
True 4
Local source or BUS IN each zone IR/RS232 control each zone 12V DC mute trigger in 12V DC status out
$1395.00
2 IN
MELBOURNE WAREHOUSE
Increase value Decrease value
True 3
2x 35W output power. Coaxial and Optical digital inputs RCA Line input Subwoofer output IR learning function for volume control
$399.00
19 IN
MELBOURNE WAREHOUSE
Increase value Decrease value
True 3
The POWERPRO300 stereo power amplifier represents the state of art design. Featuring dual inputs with signal sensing, POWERPRO300 amplifier can be configured to turn on automatically when music is sensed on the inputs. Input-1 will override Input-2 whenever the signal is present, this makes the POW 150 Watts RMS per channel power amplifier with complete custom installer feature set Bridgeable outputs for 470 Watts RMS total output power 2 pairs of Stereo RCA input: 1 pair of primary, 1 pair of priority 1 pair of high-level speaker input
$695.00
14 IN
MELBOURNE WAREHOUSE
Increase value Decrease value
True 4
6 Zone Amp with RJ45 and Wifi connection Output 2x50W 4 Ohm per zone Stereo bridge mono output Built in IR receiver and IR remote controller
RRP $1695.00
$1495.00
21 IN
MELBOURNE WAREHOUSE
Increase value Decrease value
True 1
Analogue input to Dante output converter Terminal Block Input Jack on front panel Converts Line Audio Signal to Dante Network Power over Ethernet
$449.00
14 IN
MELBOURNE WAREHOUSE
Increase value Decrease value
True 1
Dante to analogue output converter RCA output jacks on front panel Converts Dante audio signal to unbalanced line level High resolution digital to analog conversion
$395.00
18 IN
MELBOURNE WAREHOUSE
Increase value Decrease value
True 3
2CH ANALOGUE DANTE CONVERTER Converts Mic or Line audio signals to 2 channels Dante network Switchable Mic/Line/48V Phantom Power for each input Terminal block for two audio outputs on rear panel Two Mic/Line terminal block inputs on rear panel.
$499.00
6 IN
MELBOURNE WAREHOUSE
Increase value Decrease value
True 3
Four standard Mic or Line audio channels converts to Dante network. Mic/Line selectable on each input 48V Phantom Power for each condenser microphone input
$749.00
ETA
30-JUL-2021
Increase value Decrease value
True 3
120W RMS Two Channel Power Amplifier with Dante integrated 2x2 audio channels I2S digital audio format Stereo into 4-8 Ohm loads Bridgeable for 70V or 1 00V (Direct Drive)
$759.00
11 IN
MELBOURNE WAREHOUSE
Increase value Decrease value
True 3
Designed in Class D circuit. Provides 100W output power each channel at 8Ω 12V Trigger In/Out for external control Universal power supply
$715.00
2 IN
MELBOURNE WAREHOUSE
Increase value Decrease value

Be the first to hear about it!