RLRF380 RESI-LINX

3 IN 8 OUT COMBINER/AMPLIFIER
SPLITTER WITH IR REMOTE RETURN

The RL-RF380's patented design is for whole-house video distribution with IR control.

• Inputs: 3
• Outputs: 8
• Output Run Distance: 60m
• IR Control: Yes
• Must be remotely powered by an IR Modulator when using the IR Control

CLIBT510 RESI-LINX

8W BLUETOOTH AMPLIFIER MODULE
MODULE ONLY

Up to 10m range.

• PIN code changeable via PC for secure pairing
• Rename via PC to create more zones
• 8W RMS per channel
• Class D amplifier

RLVS11 RESI-LINX

UNIVERSAL VIDEO SENSOR
FOR RCA OR COMPONENT SOURCES

Compact universal Video Sensor.

• Connect to the EAS Control terminals of HD4001 to override broadcast transmissions
• Use to either trigger a Voltage Output or Dry Contact Relay on sensing of video signal
• Supports composite and component video inputs and pass through
• Can be powered remotely, or by 5V DC output of Video Extender

PA4230 No backorders RESI-LINX

SCART PLUG TO RCA SOCKETS
SCART VIDEO ADAPTOR

• Gold plated connectors

RLIR100 RESI-LINX

IR REPEATER SYSTEM
RESI-LINX FOXTEL APPROVED

The resi-linx® RL-IR100 is a Plasma Friendly Hard Wired Infrared repeater kit for use in DIY &/or custom installations, to control an A/V device at a remote location (up to 2.7m).

• Fully Foxtel Approved F30535
• Built in LED to show acknowledgement of IR commands
• Junction Box is compact and lightweight

RLIR170 RESI-LINX

LINX IR OVER CAT5 DISTRIBUTION
HUB 7X RJ45 IN 1 OUT RESI-LINX

CAT5e IR Distribution Hub that allows for simple IR distribution to up to 7 Targets in a star-wired configuration.

• Shallow mount metal casing
• Accommodates up to 8 individually terminated lines via RJ45 sockets or IDC terminations
• Dimensions: 50(H) x 140(W) x 35(D)mm
• Mounting depth: 30mm
• Foxtel Approved: F30545 for domestic fit off

RLIR305 RESI-LINX

4 PORT JUNCTION BOX
WITH POWER SUPPLY RESI-LINX

Compact Distribution Module for use in resi-linx® NEW 'linx-IR' Discrete Infrared system, with RL-IR505 (Receiver Module and Flat Target). Advantage of Discrete IR control of specific AV devices from each zone, ideal where two of the same AV devices are installed in the one area.

• Frequency Range: 20kHz-200kHz
• Power Input: 12V DC 500mA Switch Mode
• Cable Requirement: UTP cable
• Max. Cable Length: Up to 60m
• Foxtel Approved: F30543 for domestic fit off

RLIR505 RESI-LINX

IR TARGET & JUNCTION BOX
FOXTEL COMPATIBLE DISCRETE IR

Receiver Module for use in resi-linx® NEW ?linx-IR? Discrete Infrared system with RLIR305 (Distribution Module) and RL-IR700 (single) or RL-IR800 (double) Emitter.

• Frequency Range: 20kHz-200kHz
• Cable Length Included: 1.75m
• Max. Cable Length: Up to 60m
• Max. Target Reception Distance: Up to 10m
• Foxtel approved F30544 for domestic fit off

RLIR700 RESI-LINX

SINGLE IR EMITTER
FOXTEL COMPATIBLE RESI-LINX

Single head blaster-type IR emitter for AV equipment.

• Connectors: 3.5mm mini mono jack
• Cord length: 1.75m
• Emitter type: Blaster
• Emitter strength: Up to 200mm from IR receiver

RLIR800 RESI-LINX

DUAL IR EMITTER
DOUBLE FOXTEL RESI-LINX

The resi-linx ® RL-IR800 is a double head blaster-type IR emitter that repeats IR remote control signals received at an IR target and sent back through the cable to the AV equipment.

• Compatible with RF IR pass back systems (5V) and hard-wired IR systems (12V)
• Connectors: 3.5mm mini mono jack
• Cord length: 1.75m
• Emitter type: Blaster

RLACC160 RESI-LINX

IR EMITTER SHIELD
2PK- 2 PACK CLEAR DISCRETE

IR Emitter Shield for use with RL-IR700/800 emitters. Accurately projects signal when used in Discrete IR installations.

• IR Emitter shield for use with RL-IR700/800 emitters
• Accurately projects signal

RLRF210 RESI-LINX

IR FLAT TARGET FOR COAX SYSTEM
( CSRF210 ) RESI-LINX

The resi-linx® RL-RF210 is a sleek and unobtrusive "Plasma Friendly" Flat IR Target for use in the resi-linx® range of RF IR Video Distribution system.

• Flat IR Target
• LED Recognition

RLACC130 RESI-LINX

DC BLOCKER TO FILTER DC
IR OVER COAX RESI-LINX

The RL-ACC130 is used to prevent unrequired voltages passing to AV devices on any TV output of RL-RF320 splitter, where an IR target is not used.

• Connections: 1x F-connector
• Dimensions: 33(L) x 10(W)mm
• Blocking voltage: 10-22V

RLRF100 No backorders RESI-LINX

AV RF UHF MODULATOR

The RL-RF100 is a single input agile modulator complete with 12V DC 500mA power supply.

• Output frequency: 470MHz ~ 820MHz
• TV system: Pal B - Pal G
• Frequency stability: PLL (+/- 25kHz)
• Video modulation index: 87.5% ~ 82.5%

RLDM1102M RESI-LINX

SINGLE INPUT IR DVBT MODULATOR
SD DIGITAL RESILINX

resi-linx® single input SD modulator with IR return.

• Fully Programmable LCN, Channel and Network Names
• Front LCD display for adjustment of Output Channel & LCN
• Composite, Component & S-Video Inputs
• MPEG 2
• Built-in IR control for connection to resi-linx's Video Hub, IR targets and emitters

HD2002DM RESI-LINX

DVB-T DUAL INPUT HD DIGITAL
MODULATOR MPEG 2&4 - HD2002DM

digi-MOD HD converts a HD source into High Definition DVB-T channel/s for distribution via RF cable. Simple to setup and installed within minutes, digi-MOD HD is ideal for all your domestic and commercial applications including homes, motels, hotels, bars, restaurants, hospitals, airports, digital

• High Definition DVB-T Modulator that converts HD video and audio signals to digital COFDM DVB-T Channel
• Dual Mode - MPEG-2 & AVC (MPEG-4) Encoding
• Distributes 576i / 720p / 1080i / 1080p picture quality (1080p only available on AVC)
• Programmable Channel, Network Names and LCN
• 2K/8K Carriers

HD4002DM RESI-LINX

QUAD INPUT HD MODULATOR
DVB-T MPEG2/4 RESILINX

MPEG2, MPEG4 and IP for compatibility across all TVs.

• Distributes 576i / 720p / 1080i / 1080p
• Fully programmable via web interface or front display
• HDMI, Component, CVBS, Analogue Audio, Digital Coaxial/Optical inputs

RLDM4000 RESI-LINX

QUAD DVB-T DIGITAL MODULATOR
CHANNEL RF DIGIMOD

Quad Input Digital IR Modulator that converts video and audio signals to digital COFDM DVB-T Channel.

• Built-in IR control for connection to Video Hub, IR targets and emitters to allow remote TV locations to have IR control of AV equipment
• Programmable Channel & Network Names
• Composite Input
• Mixes all 4 channels into a 7MHz channel
• 2K/8K Carriers

RLDM8000 RESI-LINX

8 INPUT SD DVB-T MODULATOR
RESILINX

Commercial modulator with low cost per channel.

• 8 Input Digital Modulator
• Multiplexes on to 2 separate 7MHz channel
• Adjustable VHF/UHF Output (6-69)
• Web Management for easy programming and monitoring
• MPEG 2

RLACC500 RESI-LINX

DIGI MOD RACK MOUNT EARS
TO SUIT RLDM4000 SERIES 2

Rack mount ears.

• Suits the RLDM4000 & RLDM4002D

HD4797 RESI-LINX

DVB-T QUAD INPUT MODULATOR
MPEG-4 ENCODING HDMI LOOP OUT

DVB-T quad input modulator.

• MPEG-4, H.264 compression
• HDMI loop out
• Built-in IR

HD1608 RESI-LINX

SINGLE INPUT DVB-T DIGITAL HD
MPEG-4 NO IR NO HDMI LOOP

Most cost effective quality HD modulator on the market.

• Full function front LCD display with menu driven configuration
• Adjustable VHF/UHF output (6-69)
• 2K/8K carriers
• Compatible input resolutions 576i / 720p / 1080i / 1080p

HD8002DM RESI-LINX

8 INPUT HD DIGITAL MODULATOR
DVBT MPEG 2 / 4 RESILINX

Professional Eight Input High Definition DVB-T MPEG-2/4 Digital Modulator.

• Compatible to all HD TV's
• Distributes up to 1080p
• Adjustable VHF / UHF Output (6-69)
• Desk, Wall and Rack Mountable

HDIPPS10 RESI-LINX

10 SPLIT POWER SUPPLY
FOR HD-1600 SERIE MODULATORS

Power supply for powering up to 10 modulators.

• Can be used on HD1600/ 1600L/ 1603/ RL-DM1102M