KPAC43 NIDAC

STAND ALONE KEYPAD RFID READER
IP66 WATERPROOF

MS55ZL NIDAC

METAL ROLLER REED SWITCH
N.C CONTACTS

Roller Shutter Reed Switch 0-65mm.

• Metal alloy finish
• Normally Closed Contacts
• Colour: Metallic

CT1 NIDAC

GENERAL PURPOSE TIMER
RELAY NIDAC

The Nidac CT1 Series 3 Control Timer has 13 different operating modes and 4 timing ranges, 3 trigger modes, dual DC voltage operation & a heavy-duty relay output.

• 12 to 24V DC operation
• Accurate DIP switch selection for timing
• Selectable positive, negative or dual edge trigger
• Only 70x57x23.5mm including feet
• LED indicates operation

CR2PDT NIDAC

DPDT CONTROL RELAY
2 POLE DOUBLE THROW

A Double Pole, Double Throw control relay suitable for 12 or 24 Volt operation.

• 2 Pole change over contacts
• 2 Amp rated relay
• Low 1.2ma input current
• Pull up operation

DT712 NIDAC

7-DAY VERSATILE DIGITAL TIMER
12V DC

This versatile 7 day digital timer is ideal for use in any appliance which requires automation. It can be configured to switch at up to 8 different times during a 24 hour period. In addition, it can be programmed to operate on a wide variety of days. eg. Daily, Week days only, Weekends only, Every

• Clock: Current time setting or show current time.
• Timer: Press this button to enter program mode
• There are 8 on / 8 off programs lines
• Day: Sets the day of the week
• Min: Set the minute button

DT724 NIDAC

7 DAY VERSATILE DIGITAL TIMER
24V DC / AC OPERATION

This model allows for Switch-on and switch-off times tobe set for each program. ie Allows a different "on" duration for each program.

• Clock: Current time setting or show current time
• Timer: Press this button to enter program mode
• There are 8 on / 8 off programs lines
• Day: Sets the day of the week
• Min: Set the minute button

DRI24 NIDAC

24V DIALLER INTERFACE
TO SUIT DT1 & DT6I NIDAC

The DRI24 allows for 24V DC power sources to be used with either DT1 or DT6I diallers and provides 2 relay outputs for the NIDAC DT6I.

• Relay Contacts: 30 Volts AC/DC, 5Amps, SPDT
• Connections: 14 screw terminals & 10-Pin IDC socket
• Dimensions: 104x72x27mm, wire lead length 300mm

DE02 NIDAC

PRESS TO EXIT BUTTON
NIDAC

• Stainless Steel flush mount
• Architrave type
• Illuminated green surround LED 12V DC
• 2x isolated contacts NO/NC

RTS1000 NIDAC

CONTACTLESS EXIT DEVICE
EX-CL-RTS1000

Touchless Switches Ensure Safe and Sanitary Egress

• Uses infrared sensor technology for contactless switch activation
• Sensor Range: 0.1~10 cm
• Contacts: NO/COM/NC
• Stainless steel flush faceplate, GPO size