Can't find what you're after? Use the Support link on the bottom right or give our expert team a call on (03) 9321 8300
Search our range of quality products...
Can't find what you're after? Live Chat or give our expert team a call on 1800 337 366


118-136MHZ RFI

Code: 00280938

$99 inc GST
Increase value Decrease value
Qty Each (inc GST) Each
Request Price Match
Enter 4 digit postcode

The antenna base / matching circuit have been enclosed inhigh impact fibre-glass housing.

The CD21-35-50 uses a tapered 17-7PH stainless steel whipelement.

Electrically these antennas present a D.C open circuit between the ground and the centre conductor of the attached cable and a D.C short circuit between the antennaelement and ground.

The supplied cutting chart ensures the whip is always longer than required, allowing the antenna to be fine-tuned using a VSWR meter.

The cut length is for the whip section end - to- end before install.

Once cut to length, the whip can then be inserted fully and secured with the M5 grub screw.

Note: Although the antennas when tuned track closely with the cutting chart provided, the chart should be used asa guide only and it is strongly recommended that the antenna be finally tuned using a VSWR reflection test bridge
(VSWR meter).


  • Band
  • Tunable Bandwidth
5 MHz @ 2.0:1
  • Nominal Gain dBi
  • Tuning
Field tune to minimum VSWR using supplied chart
  • Power W
  • Cable and Connector
Not included, order separately. See note (2)
  • Whip Material
17-7 PH tapered stainless steel whip with base coil assembly



We’re here to help... Our friendly staff are here with technical advice to help you find the right solution for your needs.
The Radio Parts team of industry experts have extensive knowledge in everything electronic.

Be the first to hear about it!