Can't find what you're after? Use the Support link on the bottom right or give our expert team a call on (03) 9321 8300
Search our range of quality products...
Can't find what you're after? Live Chat or give our expert team a call on 1800 337 366



Code: 43150870

0.7140 kg
10 IN
$295 inc GST
Increase value Decrease value
Qty Each
Enter 4 digit postcode


  • Offer a wireless link solution for the audio/video/alarm signals
  • Transmits AV up to 210M (Light-of-sight)
  • Video scramble and manual 7-bit pairing key for security. (4-bit channel select and 3-bit ID
  • Built-in a buzzer for alarm indication.
  • 10mW output
  • 12VDC/ 750mA by-pass out for a box camera. (TX)
  • Built-in a bias-tee circuit (3.3V/25mA) for an activeantenna connection. (RX)
  • FCC/CE Certified
  • Requires power supplies (12V 0.5A for receiver and 12V1.5A for transmitter) (Included)


  • NTSC/PAL video format available
  • CCTV, security and surveillance
  • Wireless alarm system
  • Single TX to Single/multi RX video broadcasting


Video I/O Signal Formats: NTSC & PAL
Input Level: 1.0 -0.1/+ 0.2 Vp-p
Output Level: 1.0 -0.1/+ 0.2 Vp-p
Impedance: 75Ohms
Video Bandwidth: 5.0MHz minimum
Connector: BNC
Mono Audio I/O Input Level: 2.7 Vp-p maximum
Input Impedance: > 5,000Ohms
Output Level: 2.7 Vp-p Max (@600Ohms)
Frequency Response: 150 Hz to 15 KHz (-3dB Bandwidth)
Connector: RCA
Alarm I/O Input (TX): Level Detection 5 V TTL/CMOS Logic
Output (RX): NC or NO (dry contact)
Output Contact Rating (RX): AC 125V / 0.5A, DC 24V / 1A
Connectors: Terminal Block
Transmitter Radiated Power: FCC Part 15 (15.249) or CE
Connector Antenna: SMA Jack
Receiver Connector Antenna: SMA Jack
Bias-Tee: 3.3V/25mA
RF system Frequency of Operation: 2,400 to 2,483.5GHz
Channels (User Selectable): 4
Channel Frequencies:
2,414 MHz /2,432 MHz / 2,450 MHz / 2,468 MHz
Modulation: FM
Antenna: 3dBi Omni Directional
Range: 200metres Line of Sight (700 feet)
Controls & Indicators Channel Change:
4-bit DIP SW with auto-scan mode
ID Addressing (Pairing):
3-bit DIP SW
Alarm Mute:
1-bit DIP SW
Push Button w/ LED Indicator
TX & RX:
Power On or ARM Status
RX Only: RF Link Status


Power supplies are included with this product.
Input Voltage TX / RX (with OCP): 12.0 -1.5/+1.0 VDC
Input Current TX: <100mA (@ 12.0 VDC)
Start-up current 500mA (@ 12.0 VDC)
Input Current RX: <250mA (@ 12.0 VDC)
Output Voltage TX (with OCP): 12VDC / 750mA (Unregulated)
Mechanical & Environmental Weight (without antenna): <165g (5.82 oz)
(excluding connectors and without antenna; W×L×H)
110 × 86 × 30 mm (4.33” × 3.38” × 1.18”)
Operating Temperature: -10°C to +50°C
Storage Temperature: -30°C to +85°C

Alternate Products

True 1
12V 500mA Switch mode Regulated Includes 2 interchangeable plugs: 2.5mm/ OD 5.3m, 2.1mm/ OD 5.3mm (attached)
629 IN
Increase value Decrease value
True 1
Input: 100~240 V AC 50/60Hz 0.45 A Max, Output: 12 V DC Interchangable DC plug Includes 2.1mm and 2.5mm DC plugs Current: 1.5 Amp Fully Approved
701 IN
Increase value Decrease value
We’re here to help... Our friendly staff are here with technical advice to help you find the right solution for your needs.
The Radio Parts team of industry experts have extensive knowledge in everything electronic.

Be the first to hear about it!