PS734 DOSS

13.8V 4A REGULATED BENCH TOP
DC POWER SUPPLY (LP514)

13.8V regulated DC power supply with cigarette socket. Designed to power CBs, Automotive and Marine equipment.

• Cigarette Socket
• Galvanized Steel Case
• Fixed 13.8V DC Regulated Output
• Current Overload and Short Circuit Protection
• 4mm Banana Socket/Screw Terminals

EP613 DOSS

2.5AMP 0-30V DC POWER SUPPLY
DIGITAL BENCH TOP BLACK

Featuring TWIN LCD Voltage & Current Meters. DC Regulated power supply, 0 to 30 volts, 0 to 2.5 Amps, with Fixed 5 Volt and 12 Volt Outputs.

• Variable output: Voltage: 0-30V DC Current: 0-2.5 Amps
• Low current push terminals or high current post terminals
• Current & voltage LCD meters

SPS9400 MANSON

40AMP 3-15V DC POWER SUPPLY
DIGITAL BENCH TOP DARK GREY

This series of HIGH POWER SWITCHING MODE DC REGULATED POWER SUPPLIES provides high current 40 Amps output in a lightweight and compact size case.

• 40A current output
• Adjustable output voltages 3V to 15V
• Overload temperature protection
• Over voltage protection at 16.5V

NP9615G MANSON

5AMP 0-30V DC POWER SUPPLY
DIGITAL BENCH TOP DARK GREY

The NP-9600 Series DC Regulated Power Supplies are a completely solid state, compact, well regulated, constant voltage power supplies suitable for service field, hobby & telecommunication equipment use. It provides three different voltages output for different usage.

• Overload and Short Circuit Protection
• Independent 5V, 12V Easy Snap-On output terminals to make it easy to use for TTL and CMOS circuit testing
• 0-30V adjustable (5A Max)

SPS9600G MANSON

60AMP 1-15V DC POWER SUPPLY
BENCH TOP DARK GREY

This high current switching mode DC regulated dual output power supply is designed with a high efficient activepower factor corrector.

• Total max. continuous output current 60A (SPS-9600)
• Main Output /Remote Sensing/ Remote Control/ terminals at the back
• Front terminals 5A limiting
• Remote Sensing for remote point of regulation
• Dimensions: 220 (W) x 110 (H) x 360 (D) mm

SPS9620 MANSON

120AMP 13.8V DC POWER SUPPLY
SWITCHMODE BENCH TOP DARK GREY

The SPS9620 DC power supply has been designed for professional applications which require quality high current for equipment such as super power car audio that are normally operated from car batteries.

• Output Over Voltage Protection at 16.5V
• Remote sensing terminal for precise voltage load with long leads
• Cooling fan is on all the time, speed of fan increases with temperature of unit
• High efficiency 85%

SPS9602G MANSON

1-30V 30A DC POWER SUPPLY
SWITCHMODE BENCH TOP DARK GREY

• Total max. continuous output current 30A
• Main Output/Remote Sensing/ Remote Control/ terminalsat the back
• Front terminals 3A limiting
• Remote Sensing for remote point of regulation
• 29HR Count Down Timer (Optional) for Output ON/OFF

SPA8230G MANSON

23A CONT 25A MAX 13.8V POWER
SUPPLY BENCH TOP DARK GREY

• Output Voltage: Fixed 13.8V DC ±0.5V
• Output Current (Main output posts): 23A Cont., 25A Max. (1 min. 50% duty cycle)
• High RFI immunity
• Fan cooled
• Output Over Voltage Protection

HCS3300-USB MANSON

1-16V 0-30A POWER SUPPLY
SWITCHING 3 DIGI LED W/USB

Output Voltage: 1-16V, Output Current: 0-30A, remote programmable via USB to PC

• Rotary Encoder Control Knob with coarse & fine tuning
• 3 user presets on unit
• Application software, command sets and Labview driver.
• Over load, Over Temperature & Tracking Over Voltage protection

HCS3302-USB MANSON

1-32V 0-15A POWER SUPPLY
SWITCHING 3 DIGI LED W/USB

Output Voltage: 1-32V, Output Current: 0-15A, remote programmable via USB to PC

• Rotary Encoder Control Knob with coarse & fine tuning
• 3 user presets on unit
• Application software, command sets and Labview driver.
• Over load, Over Temperature & Tracking Over Voltage protection

NSP2050 MANSON

1-20VDC 5A SLIM MULTI-VOLTAGE
SWITCHMODE POWER SUPPLY LCD

This series of 100W Switching Mode Power Supplies with Current Limiting Control is designed with the objectives of high accuracy, compactness and easy portability.

• Autmatic Cross over CV and CC mode
• Illuminated LCD
• Output power on/off switch at front panel
• Output Voltage Adjustable Range: 1-20VDC
• Dimensions (WxHxD) 70x150x250mm

NSP3630 MANSON

1-36VDC 3A SLIM MULTI-VOLTAGE
SWITCHMODE POWER SUPPLY LCD

This series of 100W Switching Mode Power Supplies with Current Limiting Control is designed with the objectives of high accuracy, compactness and easy portability.

• Autmatic Cross over CV and CC mode
• Illuminated LCD
• Output power on/off switch at front panel
• Output Voltage Adjustable Range: 1-36VDC
• Dimensions (WxHxD) 70x150x250mm

HCS3102G MANSON

1-36VDC 5A REMOTE PROGRAMMABLE
SWITCHMODE POWER SUPPLY

After the success of our previous HCS series, high power supplies, this new low power series has been developed with end-users' feedback in mind. A USB control port has been added to allow cyclical operations with programmable voltage, current, period and time cycles. Ideal for laboratory, universi

• Remote programmable by computer via USB
• 20 programmable sets of voltage, current and cycle periods for repetitive operations up to 999 cycles
• 3 user defined voltage and current panel presets for frequent use
• Rotary encoder knob with fine and coarse adjustment
• Variable Output Current: 0-5A

HCS3400-USB MANSON

1-16V 0-40A DC POWER SUPPLY
SWITCH MODE REMOTE PROGRAMMING

Lab grade switch mode power supply.

• PC interface USB for program runs of up to 20 sets V I, time set, and 999 cycles
• Wired analogue remote controls of on off, V, and I
• 3 user presets on unit
• Open circuit constant current limit
• Application software, command sets and Labview driver

HCS3104 MANSON

1-60VDC 2.5A LAB. POWER SUPPLY
REMOTE PROGRAMMABLE

1-60V DC 0-2.5A output switchmode power supply with remote programmable via USB to computer.

• 3 User defined V & I present
• Analogue Remote Control V, I and output on-off
• Universal AC input
• Over load, Tracking Over Voltage Protections

HCS3600-USB MANSON

1-16V 0-60A DC POWER SUPPLY
SWITCH MODE REMOTE PROGRAMMING

Lab Grade Switching Mode Power Supply.

• PC interface USB for program runs of up to 20 sets V I, time set, and 999 cycles
• Wired analogue remote controls of on/off, V, and I
• 3 user presets on unit
• Open circuit Constant current limit
• Remote Sensing for HCS-3600 only

SPA8330B MANSON

33A CONT 36A MAX 13.8VDC POWER
SUPPLY BENCH TOP BLACK

An advanced new circuit design makes this power supply with higher efficiency, regulated output and specifically suitable for use with radio equipment. The power supply provides a stable, clean and RFI filtered suppressed and filtered DC source.

• Quiet cooling fan variable speed operation
• Over load, Short circuit, Over temperature protection by constant current
• Output Voltage: Fixed 13.8V DC ±0.5V
• Output Current (total): 33A Continuous, 36A Max.

SSP8160 No backorders MANSON

160W CONSTANT POWER SUPPLY
SWITCHMODE MAX 42V4A REMOTE

A conventional power supply has a fixed maximum voltage and a fixed maximum current such that the operating V & A must fall inside these limits. This completely new designed laboratory grade power supply differs by calculating and changing the voltage and current limit points according to the avail

• Adjustable upper voltage and current output levels to ensure safe operation
• 3 user presets
• Remote Programming with provided software & drivers via USB port
• Output on-off switch and control panel lock button for safer operation
• 42V max / 10A max

EP806 No backorders DOSS

PSA126 13.8V 6A REGULATED
POWER SUPPLY LINEAR MODE DOSS

The EP806 13.8V Fixed Regulated High Current Power Supply is a completely solid state, compact, well regulated, constant voltage power supply, suitable for service field, hobby and telecommunication equipment use.

• High output current loading using the screw terminals
• Light output current using the snap-in terminals
• Overload Indicator
• Automatic fan forced cooling
• Dimensions: 150 x 145 x 200mm

EP825 No backorders DOSS

13.8V 25/30 AMP DC REGULATED
POWER SUPPLY LINEAR MODE DOSS

The EP825 13.8V Fixed Regulated High Current Power Supplyis a completely solid state, compact, well regulated, constant voltage power supply, suitable for service field, hobby and telecommunication equipment use.

• High output current loading using the screw terminals
• Light output current using the snap-in terminals
• Overload protection
• Automatic fan forced cooling
• Dimensions: 150 x 145 x 305mm