IPA200 HILL AUDIO

STEREO - DUAL MONO POWER AMP
80W AT 4 OHMS RMS - HILL AUDIO

Ultra versatile power amplifier for commercial installations.

• Power Output: 2x 80W at 4Ω
• Stereo and parallel mono operation modes
• Mono-summing option for two incoming stereo signals
• Additional rear volume controls
• Noiseless convection cooling

QPA2800 HILL AUDIO

4 X 450W @ 4O POWER AMP
DIGITALLY LINEAR CONTROLLED

A contractor compact, powerful and easy-to-handle 4-channel amplifier to drive multichannel low-impedance loads.

• Linear quadruple power amplifier
• Bipolar transistor output stages, 2 ohm stable
• 2+2 channel dual block design
• Stereo, parallel mono and bridge operation modes for each amplifier block

EPA152 AUDAC

AUDAC 2 X 150W RMS POWER AMP
CLASS D

Audac energy efficient dual class-D power amplifier.

• 2 x 150W @ 8Ω
• Lightweight class D amplifier
• Convection cooled
• Advanced protection

EPA252 AUDAC

AUDAC 2 X 250W RMS POWER AMP
CLASS D

Audac energy efficient dual class-D power amplifier.

• 2 x 250W @ 8Ω
• Lightweight class D amplifier
• Convection cooled
• Advanced protection

EPA502 AUDAC

AUDAC 2 X 500W RMS POWER AMP
CLASS D

Audac energy efficient dual class-D power amplifier.

• 2 x 500W @ 8Ω
• Lightweight class D amplifier
• Convection cooled
• Advanced protection

EPA104 AUDAC

AUDAC 4 X 100W RMS POWER AMP
CLASS D

Audac energy efficient dual class-D power amplifier.

• 4 x 100W @ 8Ω
• Lightweight class D amplifier
• Convection cooled
• Advanced protection

EPA254 AUDAC

AUDAC 4 X 250W RMS POWER AMP
CLASS D

Audac energy efficient dual class-D power amplifier.

• 4 x 250W @ 8Ω
• Lightweight class D amplifier
• Convection cooled
• Advanced protection

CAP412 AUDAC

4 X 120W 100V QUAD POWER AMP
AUDAC

Professional 100V Multi-Channel Power Amplifier

• 4 x 100 Volt outputs
• 4 x 120w output
• High-pass filter switch ( 400Hz )
• DC malfunction, short circuit, overheating, overload, protection

CAP448 AUDAC

4 X 480W 100V QUAD POWER AMP
AUDAC

Professional 100V Multi-Channel Power Amplifier

• 4 x 100 Volt outputs
• 4 x 480w output
• Class-D Amplifier Technology
• XLR Signal Linkthrough
• Temperature controlled fan

DPA616 AUDAC

16 X 60W CLASS D AMPLIFIER
AUDAC

Professional sixteen channel power amplifier.

• 60 Watts to 4Ω loads - 16 channels
• Bridge mode, it can deliver 120 Watts to 8Ω loads to the 8 bridged outputs.
• DC malfunction, short circuit, overheating, overload protection

PRO1358 PRO2

STEREO AUDIO POWER AMPLIFIER
WITH REMOTE CONTROL

Provides manual or remote volume control

• Amplifier Type: Stereo Class-D
• Provides volume level indicator
• Provides 3 IR path remote control

QX1280 QUEST

1 X 280W POWER AMPLIFIER
4 OHM & 70/100V

Studio quality sound designed for AV installations and high end commercial installations

• Power Output: 1 x 280w
• Transformerless outputs - 70/100V or Low Impedance Operation
• Selectable 80 Hz high-pass filter on each output
• Built-In Limiter Circuit
• Auto-Sleep Function

QX2280 QUEST

2 X 280 WATT POWER AMPLIFIER
4 OHM & 70/100V

Studio quality sound designed for AV installations and high end commercial installations

• Power Output: 2 x 280w
• Transformerless outputs - 70/100V or Low Impedance Operation
• Selectable 80 Hz high-pass filter on each output
• Built-In Limiter Circuit
• Auto-Sleep Function

QX4280 QUEST

4 X 280 WATT POWER AMPLIFIER
4 OHM & 70/100V

Studio quality sound designed for AV installations and high end commercial installations

• Power Output: 1 x 280w
• Transformerless outputs - 70/100V or Low Impedance Operation
• Selectable 80 Hz high-pass filter on each output
• Built-In Limiter Circuit
• Auto-Sleep Function

QA1004 QUEST

575 WATT PER CHANNEL STEREO
POWER AMP QUEST

The Quest QA1004 575w power amp is designed and engineered to a standard to handle even the most demanding installation.

• Low and High pass filters.
• 2 x 575 Watts at 4Ω
• Designed to handle low impedance (2Ω) with soft clipping
• Heavy duty cold rolled steel construction and machined aluminium front panel
• Switch able limiter system

QA2004 QUEST

875 WATT PER CHANNEL STEREO
POWER AMP QUEST

Quest QA Series power amplifies are built to work hard in the tough environment of pro audio.

• Silent switch on/off circuitry reduces potential speaker damage
• The high current power supply is manufactured to function reliably at high temperatures and well exceeds industry standards
• XLR parallel male and female input connections
• Speakon Connections
• 870W per channel @ 1kHz into 4Ω

P1812 TOA

120W POWER AMPLIFIER

The TOA P-1812 Booster Amplifier can be connected to an A-1800 Series amplifier's line out which provides an optimal level and impedance to efficiently drive the P-1812.

• Switchable input levels
• Emergency control

P2240 TOA

240W POWER AMPLIFIER
TOA

TOA?s P2240 Power Amplifier is designed to complement the A2000 Series of Mixer Power Amplifiers and is consequently a highly cost effective solution to the demands of PA applications.

• 240 Watt 100 Volt, 70 Volt or low impedance outputs
• Volume, bass and treble control on front panel
• Line level in and out for cascade operation
• 100 Volt line input 50Hz or 20kHz frequency response

PA2030A YAMAHA

60W POWER AMPLIFIER
1X 60W 2X 30W YAMAHA

Compact low and high impedance power amp.

• Ideal compliment to the MA2030
• 1x 60W Hi-Z, 2x 30W Low-Z
• Speaker Eq via dip switch's
• Space-saving 1U half-rack size

XMV4140 YAMAHA

4CH 8 OHM / 70-100V POWER AMP
YAMAHA

Cost effective 4 ch power amp, making it the best Installation Amp.

• High impedance and low impedance - or both
• Double Power Mode
• Selectable input formats for a wider range of applications
• A perfect match for the MTX Series processors
• 4 x 125 watt at 100v / 70v lines

XMV8140 YAMAHA

8X 140W MULTI CHANEL POWER AMP
YAMAHA

Cost effective 8ch power amp, making it the best Installation Amp.

• High impedance and low impedance - or both
• Selectable input formats for a wider range of applications
• A perfect match for the MTX Series processors
• 8 x 140 watt at 4 / 8 ohm

XMV4280 No backorders YAMAHA

4CH 8 OHM / 70-100V POWER AMP
4 X 250 W YAMAHA

Cost effective 4 ch power amp, making it the best Installation Amp.

• High impedance and low impedance - or both
• Double Power Mode
• Selectable input formats for a wider range of applications
• A perfect match for the MTX Series processors
• 4 x 250 watt at 100v / 70v lines

QA3004 QUEST

1100W PER CHANNEL STEREO AMP
POWER AMPLIFIER

Quest QA Series power amplifies are built to work hard in the tough environment of pro audio. Industrial spec multi-speed fans and generous heat sinks will keep the output stage cool even if the amplifier is installed in a dusty and poorly ventilated area.

• High Current Power supply
• Industrial spec fans
• XLR parallel male and female input connections
• International AES standard Speakon connectors
• Selectable Gain settings

QA4004 QUEST

1700 WATT PER CHANNEL STEREO
POWER AMP QUEST

The new series QA amplifier range has been designed and engineered to a standard that takes it well into the upper register of high fidelity pro audio amplifiers

• Rated Power (2x 2Ω): 1700 W per channel
• T.H.D.: >0.5% @ 400 W per channel from 20 Hz to 20 kHz
• Connectors: XLR, Speakon speaker output
• Dimensions: 132 x 483 x 496mm (3RU)