DPA616 -SIXTEEN-CHANNEL CLASS-D AMPLIFIER 16 X 60W
The DPA616 is a professional sixteen channel power amplifier which is capable of delivering a power of 60 Watt to 4 Ohm loads connected to the 16 output channels.
When used in bridge mode, it can deliver a power of 120 Watt to 8 Ohm loads connected to the 8 bridged outputs.
This way, the DPA616 is the perfect solution for installed multi-zone audio distribution systems with 8 or 16zones.
This amplifier is designed as a no-nonsense amplifier with only the necessary controls and connections which creates great simplicity in use and installation.
The input connections are all performed with 3-pin Terminal block connectors, allowing the connection of balanced input signals.
Every channel is fitted with a separate gain control potentiometer and for every two input connectors, there is astereo / bridge & parallel switch provided whereby two channels can be bridged or linked in parallel, avoiding a cable clutter when multiple channels should be fed with the same input signal.
The output connections are performed with 4-pin Terminal block connectors allowing connections for separate or bridged output channels.
A built-in multipurpose protection circuit protects against DC malfunction, short circuit, overheating, overloadand limits the signal when necessary.
This all is housed in a double rack space, steel 19” rack mount housing.
Specifications
| > 100 dB |
| < 0.1% |
| Class-D |
| DC Short circuit |
| Over heating |
| Over load |
| Signal limiting |
| 0° ~ 40° @ 95% Humidity |
| @ 4 ? Stereo | 16 x 60 W |
| @ 8 ? Stereo | 16 x 30 W |
| @ 8 ? Bridge | 8 x 120 W |
| Response (± 3 dB) | 20 Hz - 20 kHz |
| Sensitivity (1W/1m) | -20 dB ~ +20 dB |
| Connector | 3-pin Euro Terminal Block (Pitch - 3.81 mm) |
| Connector | 4-pin Euro Terminal Block (Pitch - 5.08 mm) |
| Supply | Switching mode |
| Source | 100 ~ 240 V AC / 50 ~ 60 Hz |
| 482 x 88 x 322 mm (W x H x D) |
| 8.200 kg |
| 19” |
| 2 HE |
| Steel |
| Black |