106-013 NESS

4X RELAY BOARD SUIT
D8X D16X NESS

The optional X Series Relay Board plugs directly into the AUX header on the D8x and D16x control panels to provide 4 relay outputs driven as programmed by Aux 1, 2, 3 & 4 outputs.

CT1 NIDAC

GENERAL PURPOSE TIMER
RELAY NIDAC

The Nidac CT1 Series 3 Control Timer has 13 different operating modes and 4 timing ranges, 3 trigger modes, dual DC voltage operation & a heavy duty relay output.

• 12 to 24V DC operation
• Accurate DIP switch selection for timing
• Selectable positive, negative or dual edge trigger
• Only 70x57x23.5mm including feet
• LED indicates operation

CR2PDT NIDAC

DPDT CONTROL RELAY
2 POLE DOUBLE THROW

A Double Pole, Double Throw control relay suitable for 12 or 24 Volt operation.

• 2 Pole change over contacts
• 2 Amp rated relay
• Low 1.2ma input current
• Pull up operation

101-283 NESS

BASIC 12V RELAY NESS

12V DC relay with normally open (N\O) and N\C contacts.

REL04

12V AC SPST RELAY TO SUIT DB
SINGLE THROW SINGLE POLE

AC / DC single pole single throw relay to suit intercoms and alarms.

• Supply Voltage: 12V DC or 16V AC

DT712 NIDAC

7-DAY VERSATILE DIGITAL TIMER
12V DC

This versatile 7 day digital timer is ideal for use in any appliance which requires automation. It can be configured to switch at up to 8 different times during a 24 hour period. In addition, it can be programmed to operate on a wide variety of days. eg. Daily, Week days only, Weekends only, Every

• Clock: Current time setting or show current time.
• Timer: Press this button to enter program mode
• There are 8 on / 8 off programs lines
• Day: Sets the day of the week
• Min: Set the minute button

DT724 NIDAC

7 DAY VERSATILE DIGITAL TIMER
24V DC / AC OPERATION

This model allows for Switch-on and switch-off times tobe set for each program. ie Allows a different "on" duration for each program.

• Clock: Current time setting or show current time
• Timer: Press this button to enter program mode
• There are 8 on / 8 off programs lines
• Day: Sets the day of the week
• Min: Set the minute button

HSC110SS CABAC

WEATHERPROOF SUNSET SWITCH
LIGHT SENSOR / TIMER / ECO

• Easy mode & timer programming using internal dip switches
• Industry compatible form factor suitable for retrofitting to HPM base
• IP56 rated product for worry free outdoor installations
• Heavy-duty brass terminals
• 15 minute steps timer range, up to 15.75 hours (or day break)

HNS410TM CABAC

SINGLE MECH 1-30MIN TIMER
2 WIRE LIGHT SWITCH

Unique 2-in-1 energy-saving light switch that can be easily retrofitted to most installed lights.

• Supports Timer and No Timer modes of operation
• Blue LED indicates device status
• User programmable time-out period
• Programmable in 1 minute increments from 1 to 30 minutes
• Quick LED flashing within 10 seconds of time out provides expiry warning